Assemb/y & Adjusting
INSTALLING PIN END BLADES
WARNING: To avoid injury from unexpected tool movement, always unplug the saw before installing, removing,or replacingthe blade.
1 . Unplug power cord from outlet.
2.Install blade with the tension lever in vertical position.,
3.Install the blade through the insert opening. Have the teeth pointing down. Engage the pin into the "V" notch of the lower blade holder.
Lever
wLower Blade Holder
4.Pull up on the blade and engage the upper pin in the notch of the upper blade holder.
Blade Holder
5.Flip tension lever down to horizontal position to lock in tension.
NOTE: For your own need, turn blade tension lever clockwise until blade is tensioned.
10