14.F IMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o E !e that keys and adjusting wrenches are removed from tool before turning I' on.
15.L JOlD UNINTENTIONAL STARTING. Don't carry
16.( UTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only E :tension cords intended for use outdoors and so marked.
17.$ TAY ALERT. Watch what you are doing, use common sense. Don't operate t 01 when you are tired.
18.( HECK DAMAGED PARTS. Before further use of the tool, a guard or other
F irt that is damaged should be carefully checked t o determine that it will C ierate properly and perform its intended function. Check for alignment of r oving parts, binding of moving parts, breakage of parts, mounting, and any c her conditions that may affect its operation. A guard or other part that I damaged should be properly repaired or replaced by an authorized serv- I' e center unless otherwise indicated elsewhere in this instruction manual. t w e defective switches replaced by authorized service center. Don't use t 01 if switch does not turn it on and off.
19.( UARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded I irfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
20.F !PLACEMENT PARTS. When servicing, use only identical replacement parts.
voLT ,GE WARNING: Before connecting the tool to a power source (receptacle, outle etc.) be sure the voltage supplied is the same as that specified on the namc )late of the tool. A power source with voltage gr.eater than that specified for t k ! tool can result in SERIOUS INJURY t o the user - as well as damage to the tl 01. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltas e less than the nameplate rating is harmful to the motor.
3