Makita JV2000 instruction manual Using guide rule Rip fence, Using circular guide

Using guide rule (Rip fence)

1. When cutting widths of under 150 mm (6") repeatedly, use of the guide rule will assure fast, clean, straight cuts.

2.To attach the guide rule (rip fence), use the hex wrench to loosen the screw on the under side of the base in front, slip in the guide rule and secure the screw.

Fig. 13

Using circular guide

1.Use of the circular guide insures clean, smooth cutting of circles (radius; under 200 mm; 7-7/8") and arcs.

Fig. 14

9