Operating Procedures

OPERATION

ing the maximum clearance increases the chance of the chain being dislodged from the bar groove.

2.Make sure the bar attaching nuts are fully tightened and the chain guard is in place.

keep from pinching the saw bar and chain as a re- sult of falling pieces of concrete, brick, etc.

2.Make your cuts in the order shown in Figure 5, start- ing with cut 1 (base horizontal cut) and proceeding with the remaining three cuts.

Bottom of Bar

Max 5/16"

Figure 3. Maximum Chain Clearance

CHECK CHAIN SEGMENT WEAR

1.Using adjustable calipers, measure several chain segments as illustrated in Figure 4.

Bottom of Bar

Min.

1/16"

Figure 4. Chain Segment Wear

2.If the average measurement is less than 1/16- inch/1.6 mm, then the chain must be replaced. Refer to your Service Manual for chain replacement pro- cedures.

1.Observe all safety precautions.

2.Turn on the water supply. Water at the tool will be directed to the bar and chain when the trigger on the tool is squeezed ON.

3.Operate the tool for two minutes away from the in- tended cut and then check the chain tension. New chain will normally stretch during its first usage. It is very important to keep the chain tension adjusted so that it does not exceed 5/16 in./8 mm clearance from the bottom of the bar. See Check Chain & Bar Adjustment in this manual.

4.If the chain requires adjustment, see Maintenance & Adjustments in this manual.

PLAN THE CUT

1. Plan your cuts to prevent injury to yourself and to

Figure 5. Planning Cuts

3.Outline the concrete area with a permanent marker for a visual guide.

4.Know what kind of material and how much reinforc- ing you are going to cut.

TYPES OF CUTS

The DS06 can be operated using the types of cuts shown in Figure 6. When making cuts:

NOTICE

The following are general cutting procedures and techniques. Differences in the terrain and the type of material being cut will make this information more or less valid for particular areas. For advice on specific cutting problems or techniques, consult your local Stanley Representative. He/she can often provide information that will make your work safer and more productive.

12 ► DS06 User Manual

DS06 specifications

Stanley Black & Decker DS06 is a powerful and versatile tool that combines cutting-edge technology with user-friendly features, making it a must-have for both professionals and DIY enthusiasts. Designed for optimal performance, the DS06 caters to a wide range of applications, from heavy-duty construction tasks to light home improvement projects.

One of the standout features of the DS06 is its robust motor. With a high power output, this tool delivers consistent performance, ensuring that users can tackle even the toughest materials with ease. The motor's efficiency not only enhances the tool's performance but also contributes to its longevity, allowing it to withstand rigorous use in demanding environments.

In addition to its powerful motor, the DS06 incorporates advanced battery technology. Equipped with a lithium-ion battery, this tool promises an extended runtime and reduced charging times compared to traditional batteries. Users can experience greater convenience, as the quick-charge capability means less downtime and more productivity. The battery's lightweight design also enhances the tool's overall ergonomics, making it more comfortable to handle during extended use.

Another significant characteristic of the DS06 is its intelligent design. Featuring an ergonomic grip, the tool is designed to reduce user fatigue, making it suitable for prolonged tasks. The lightweight construction of the DS06 ensures that users can maneuver the tool easily without compromising control.

Stanley Black & Decker has also prioritized safety with the DS06. It includes several safety features, such as a blade guard and a safety lock-off switch, which help prevent accidents during operation. These features provide peace of mind, allowing users to focus on their work without worrying about potential hazards.

Versatility is a key attribute of the DS06, with its ability to accommodate various attachments and accessories. This adaptability makes it a valuable addition to any tool collection, as it can be used for a wide array of tasks, including cutting, sanding, and drilling.

In summary, the Stanley Black & Decker DS06 is a tool that exemplifies innovation and practicality. Its powerful motor, advanced battery technology, ergonomic design, and safety features make it an ideal choice for a diverse range of applications. Whether you're a professional contractor or a weekend warrior, the DS06 is equipped to meet your needs and elevate your work efficiency.