Quality and Reliability

A CLOSER LOOK

Designed And Built For The Off-Shore Salt Spray And Other Corrosive Environments

Assembled on a heavy gauge galvanized steel frame. Designed for durability on the job site. Rugged construction withstands rough field handling, protecting internal parts.

Fuel tank coated inside and out with plastisol.

Material does not interact with diesel fuel.

Lexan™ nameplates - printing will not wash out from salt spray.

Weather protective covers on all receptacles.

All toggle switches sealed to protect against moisture.

All switch and wire connections are coated for corrosion protection and to prevent electrical "tracking" between contacts.

•Most fasteners are stainless steel. Assembled with anti-seize compound.

•Perkins 4-cylinder, water-cooled industrial diesel engine offers low maintenance and long life. Water separator on engine to filter water from diesel fuel.

•Automatic shutdown protection for low oil pressure or high coolant temperature.

•Two 12 volt batteries paralleled for 1130 cold cranking amps of engine starting.

•Printed circuit board for idler and engine protection is potted to provide a robust environmental shield.

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

•Approved by the Canadian Standards Association (CSA).

•Three-year Lincoln warranty. (Engine is warranted separately by the manufacturer.)

Stainless steel roof, doors, control panel and remote control box.

Radiator - phenolic (plastic) dip- coated for corrosion protection.

All copper coil windings. Improved coil insulation for

increased durability.

Generator, armature and exciter lamination stacks are dipped in E-Coat for a tough, completely bonded coating.

Brushholder assemblies are stainless steel and non-metallic materials to avoid corrosion.

Hot-dip galvanized base, radiator shroud and internal steel components.

SAE-400 Severe Duty

[3]	www.lincolnelectric.com