Lincoln Electric IM311-E manual Accessories, Optional Equipment, GUN and Cable Assemblies

Page 14

C-1

 

 

ACCESSORIES

 

C-1

 

 

 

 

 

 

 

OPTIONAL EQUIPMENT

 

 

 

 

GUN AND CABLE ASSEMBLIES

 

 

 

 

 

 

 

 

 

 

Type

K-355-10*

K-345-10*

K-264-8

K-361-10

K-406*

 

 

 

 

 

 

Length:

10 feet

10 feet

8 feet

10 feet

Linconditioner Gun 10 ft.

 

 

 

 

 

 

(15 ft. Exhaust Hose)

 

 

 

 

 

 

Rated Welding

 

 

 

 

 

Current:

250 Amps

350 Amps

250 Amps

350 Amps

350 Amps

 

 

 

 

 

 

Duty Cycle

60%

60%

60%

60%

60%

 

 

 

 

 

 

Electrode Sizes

.068, .072, 5/64

.068, .072, 5/64

068, .072, 5/64

068, .072, 5/64

068, .072, 5/64

 

 

 

 

 

 

Reduced Speed

 

 

 

 

 

Switch

Std.

Std.

None

None

Std.

 

 

 

 

 

 

Sizes

5/64

5/64

5/64

5/64

5/64

 

 

 

 

 

 

Nozzle Angle

90E

90E

62E

62E

68E

 

 

 

 

 

 

Weight

7.0 lbs.

89.3 lbs.

5.2 lbs.

7.5 lbs.

16.0 lbs.

 

 

 

 

 

 

 

* Recommended for pipe welding applications.

All guns include one each .068/.072 tip, 5/64 tip, and a thread protector**. The K-264-8 also includes an insulated guide for 3/4" to 1-1/2" stickout. The K-361-10 also includes an insulated guide for 2" stickout.** The K-406 includes an insulated guide for 2" to 1" stickout, but no thread protector.

K350 ADAPTER KIT

Required when using the LN™-23P on any constant voltage power source. Either one or two LN™-23P’s can be connected to the Adapter. If two LN™-23P’s are connected, they can be set for different proce- dures. The Adapter circuit is interlocked so only one LN™-23P can be used at a time.

K350-1Adapter Kit

The K350-1 is similar to the K350 but has a 14 pin connector on the end of the control cable that will interface with any Lincoln power source that utilizes a 14 pin connector for control.

Note: An Adapter Kit is not required when connecting a LN™-23P / K316L-2 (8pin connector) to a V350-Pipe, V350PRO or V450PRO.

K-276 ENCLOSED WIRE REEL SUPPORT

Bolts to the LN™-23P frame for feeding wire from standard 50 lb. Innershield coils. Includes enclosure and door to keep the dirt out; also includes wire reel brake assembly.

LN™-23P

Image 14
Contents LN -23P Safety California Proposition 65 WarningsElectric Shock can kill Welding and Cutting Sparks can Cause fire or explosion Précautions DE Sûreté Sûreté Pour Soudage a L’ArcThank You Table of Contents Environmental Rating InstallationTechnical Specifications LN-23P Work Cable and Remote Voltage Sensing Work Lead Safety PrecautionsInput Cable Innershield GUN and Cable Wire Drive Rolls and Guide TubesOptional Features Installation Product Description Loading the Wire ReelOperation Instructions for Loading Wire Into LN-23P For machines that have code numbers Higher thanMaking the Weld Adjusting Wire Feed Speed and VoltageDrive Roll Pressure Optional Equipment AccessoriesEnclosed Wire Reel Support GUN and Cable AssembliesGUN and Cable Maintenance MaintenanceRemoving Idle Roll Assembly Wire Drive Assembly MaintenancePower Source Circuit Protection NameplatesTroubleshooting HOW to USE Troubleshooting GuideContact your local Lincoln Authorized Field Service Facility Troubleshooting Diagrams LN-23P Adapter KIT Wiring DiagramWiring Diagram LN-23P Wiring Diagram Connection of CV Converter to LN-23P’S and SA-200 or SA-250 14269 Connection of LN-23P and Adapter KIT to R3S-250 or R3S-325 Connection of LN-23P and Adapter KIT to R3S-400, 600 or 14272 Diagrams Diagrams Diagrams 12DIAGRAMS 17124 2-19-82MField Calibration of K-316 LN-23P P.C. Board Precaucion Warnung