TECHNICAL SPECIFICATIONS
POWER WAVE® i400
Input Power |
|
| 3 Phase Input |
| 50/60 Hz |
| * Single product number - CE compliance is provided with a CE Filter |
| Kit. Input voltage is limited to |
Duty Cycle | 350A/34V/100% |
| 400A/36V/60% |
| 420A/37V/40% |
| * No derating for CV versus Pulse modes. |
Output Current Range | |
| * Best in class rated machine for power. |
Output Voltage Range | |
Cooling Method | Fan As Needed™ (F.A.N.) |
| * Cooling fan runs when the output is energized, and for 5 minutes after |
| the output has been turned off. |
|
|
Power Factor at Rated Output | .95 |
IP Rating | IP21S |
Welding Output | CV/DC |
Welding Processes | |
Dimensions - H x W x D in (mm) | 21 x 18.5 x 23.6 in (533 x 470 x 600 mm ) |
Net Weight - lbs (kg) | 209 lbs. (95 kg) |
Volume | 0.150 m3 |
Universal Certifications | CE, CSAC/UL, |
|
|
|
|
AUTODRIVE™ 4R90
|
|
|
Wire Drive | 4 Driven Rolls | |
| * 4 Gear powered rolls versus competitive 2 gear driven rolls & 2 idle rolls | |
Motor Type | Permanent Magnet DC Motor | |
Tachometer Type | Magnetic High Resolution Dual Channel | |
Wire Feed Speed Range in/min (m/min) | AutoDrive™ 4R90 - 50 to 800 in/min (0.8 to 20.3 m/min) | |
Max Wire Size Range | AutoDrive™ 4R90 | |
| Solid: | .023 |
| Cored: | .035 |
Dimensions – L x W x H inches (mm) | 9.1 x 7.5 x 8.4 inches (231 x 141 x 213 mm) | |
Net Weight - lbs (kg) | 14.5 lbs. (6.5 kg) | |
Universal Certifications | CE, CSAC/UL, | |
|
|
|
C U S TO MER A SS IST A NC E PO LI CY
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
THE LI NC OLN ELEC TRIC COMP ANY
22801 St. Clair Ave., Cleveland, OH