Lincoln Electric IM850-A Installation, NON-STANDARD Safety Information, Location and Mounting

SAFETY PRECAUTIONS

Read this entire installation section before you start installation.

WARNING

ELECTRIC SHOCK can kill.

• Only qualified personnel should per- form this installation.

•Turn the input power OFF at the dis- connect switch or fuse box before working on this equipment. Turn off the input power to any other equip- ment connected to the welding sys- tem at the disconnect switch or fuse box before working on the equip- ment.

•Do not touch electrically hot parts.

-------------------------------------------------------------

NON-STANDARD SAFETY INFORMATION

CAUTION

The PF-10S series of wire drives may be at weld- ing voltage potential when the output of the power source is active.

------------------------------------------------------------------------

INPUT AND GROUND CONNECTIONS

Only a qualified electrician should connect the POWER FEED 10S. Installation should be made in accordance with the appropriate National Electrical Code, all local codes and the information in this manu- al.

LOCATION AND MOUNTING

•The POWER FEED 10S will operate in harsh envi- ronments.

HIGH FREQUENCY PROTECTION

Locate the POWER FEED 10S away from radio con- trolled machinery.

POWER FEED 10S