![](/images/new-backgrounds/1145146/14514633x1.webp)
ACCESSORIES | ||
|
|
|
tion kit converts old NA style wire drives.
1.Remove the 2 hex head screws and the 2 slot head screws holding the Motor to the Wire Drive Gearbox assembly.
2.Remove existing Adapter Plate and Motor Assembly.
3.The Conversion Kit Motor is shipped configured for a 142:1 gear ratio. The existing gearbox must be con- figured for a 142:1 gear ratio for the Conversion Kit to assemble correctly. If both assemblies are not con- figured for the same gear ratio, this must be done before continuing. (See Gear Ratio Conversion Kit instructions.)
4.Cover the teeth of the new Motor pinion gear with a
5.Reassemble the new Adapter Plate and Motor Assembly on the Wire Drive Gearbox; making sure the gears mesh properly and the Adapter Plate locat- ing bead is in its cavity. Replace and tighten the 4 screws removed in step 1.
POWER FEED 10S