Lincoln Electric IM850-A manual Ate, Changing Wire Drive Configuration

Page 13

A-3

INSTALLATION

A-3

 

 

 

CHANGING WIRE DRIVE CONFIGURATION

The POWER FEED-10S Wire Drives can be reconfig- ured to fit in any hard automation application.

The POWER FEED-10S Wire Drives can be reconfig- ured in such a way that the wire feed direction is reversed. If this is the case, the motor leads must be reversed so the wire will feed correctly. Follow these instructions to reverse the motor polarity. (See Figure A.3)

1.Remove all power from the POWER FEED-10S Wire Drive.

2.Disconnect the Control Cable from the POWER FEED-10S Wire Drive Connection Box.

3.Loosen the fastener from the Band Strap to the Connection Box, which secures the assembly to the Motor housing, and expose the leads inside of the Connection Box.

4.Locate the Motor leads. These leads will go from the Motor to the Control Cable connector on the inside of the Connection Box.

5.Carefully disconnect the Motor leads from the har- ness by pulling the quick-connect terminals apart.

6.Reverse the motor leads and reconnect the quick- connect terminals (see Wiring Diagram).

7.Carefully replace the wire harness back into the Connection Box and place back onto the Motor housing locating over the Motor lead grommet. Ensure that the tachometer leads are completely covered by the Channel that snaps into the Connection Box. The Connection Box assembly should be pushed all the way up to the Motor-to- Gearbox Adapter Plate.

8.Before securing the Connection Box to the Motor housing with the Band Strap, ensure that none of the harness leads are being pinched underneath the edges of the Connection Box and Channel.

9.Place the Band Strap into the "T" slot on the side of the Connection Box and wrap it around the Motor housing.

10.Replace the fastener between the Band Strap and the Connection Box. Tighten so that the Connection Box cannot move on the Motor housing.

FIGURE A.3

REMOVE CONNECTION BOX

TO CHANGE MOTOR POLARITY

R

O

T

ATE

LOOSEN SOCKET HEAD SCREW TO ROTATE FEEDPLATE

 

T

E

 

 

 

A

 

T

 

RO

 

 

LOOSEN HEX HEAD SCREW ON GEARBOX STRAP TO ROTATE THE

MOTOR AND GEARBOX ASSEMBLY

POWER FEED 10S

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Power Feed 10S California Proposition 65 Warnings SafetyElectric Shock can kill Cylinder may explode if damaged Sûreté Pour Soudage a L’Arc Précautions DE SûretéThank You Table of Contents 1PRODUCT DESCRIPTION1 General Information Design FeaturesTechnical Specifications Power Feed 10S SpecificationsNON-STANDARD Safety Information InstallationInput and Ground Connections Location and MountingMounting Dimensions Power Wave AC/DC 1000AMP Subarc System ConnectionsATE Changing Wire Drive ConfigurationElectrode and Work Connections Remote Sense Lead SpecificationsFigure A.4 Welding with Multiple ArcsInstallation Accessories Periodic Maintenance MaintenanceCalibration Specification Sense Lead FuseHOW to USE Troubleshooting Guide TroubleshootingOutput Problems Diagrams Wiring Diagram for Power Feed 10SPrint DimensionPower Feed 10S Precaucion Warnung

IM850-A specifications

The Lincoln Electric IM850-A is a cutting-edge inverter-based multi-process welder that has made a significant impact in the welding industry. Known for its versatility and robust features, the IM850-A caters to a wide array of welding applications, making it an ideal choice for both professional welders and hobbyists alike.

One of the standout features of the IM850-A is its multi-process capability. This welder supports MIG, TIG, and Stick welding processes, providing users with the flexibility to tackle various projects with ease. Whether you are working with thin sheet metal or heavier materials, this machine is designed to deliver superior performance across all welding disciplines.

The IM850-A is powered by Lincoln Electric's advanced inverter technology, which not only enhances efficiency but also significantly reduces the overall size and weight of the unit. This technology allows the welder to operate with a high power-to-weight ratio, making it portable and easy to transport to job sites or workshops. The inverter design also helps in maintaining a stable arc, ensuring high-quality welds with minimal spatter.

In terms of user interface, the IM850-A features an intuitive control panel that simplifies operation. With straightforward settings for amperage and voltage, welders can easily adjust parameters to suit different applications. Additionally, the digital display provides real-time feedback, allowing users to make precise adjustments on the fly.

Another notable characteristic of the IM850-A is its durability. Built with rugged materials, this welder is designed to withstand the rigors of daily use in demanding environments. The machine is also equipped with thermal overload protection, which safeguards it from overheating and extends its lifespan.

The IM850-A supports a wide range of welding materials, including mild steel, stainless steel, and aluminum. Its capability to handle various wire diameters enhances its versatility further, allowing for efficient operation with different welding wire types.

Safety is paramount in the design of the IM850-A. It comes equipped with advanced safety features, including an automatic shut-off function and protective circuitry, ensuring that users can work with confidence.

Overall, the Lincoln Electric IM850-A is a powerful and highly versatile welding machine that combines advanced technology with user-friendly features. Its combination of multi-process capability, inverter technology, and rugged durability makes it a top choice for those looking to achieve high-quality welds across a wide array of applications. Whether you're a seasoned professional or just starting in the world of welding, the IM850-A stands out as a reliable and efficient tool for any welding project.
Top Page Image Contents