OPTIONAL ACCESSORIES
K870 - Foot Amptroltm for TIG welding. When the V200-T’s Output Control is in the “REMOTE” position, the foot Amptrol energizes the output and controls the output remotely. The Foot Amptrol connects directly to the 6 pin Amphenol.
K812 - Hand Amptroltm for TIG welding. When the V200-T’s Output Control is in the “Remote” position, the hand Amptrol energizes the output and controls the output remotely. The Hand Amptrol connects directly to the 6 pin Amphenol.
K814 - Arc Start Switch - Energizes the output for TIG welding if remote output control of the amperage is not desired. It allows on/off TIG welding at the cur- rent set by the Current Control on the control panel. When using the Arc Start Switch set the Output Control to the “LOCAL” position.
Magnum® LA-9 and LA-17/LA-17V TIG Torches - The following standard Magnum® TIG torches with one-piece cable may be used with the Invertec V200-T.
• K859-1 | LA-9 | 12.5 ft | medium back cap |
• K859-5 | LA-9 | 25 ft | medium back cap |
• K860-1 | LA-17 | 12.5 ft | long back cap |
• K860-5 | LA-17 | 25 ft | long back cap |
• K860-9 | LA-17V | 12.5 ft | long back cup;w/gas valve |
• K860-13 | LA-17V | 25 ft | long back cup;w/gas valve |
NOTE: Each torch requires a quick connector plug (S22529-1) and strain relief boot (M17255) be installed onto the cable. Collets, collet bodies, and nozzles are not included and must be ordered sepa- rately.
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches to welding cable to provide quick disconnect from machine.
Quick Connect Plug (S22529-1) and Strain Relief Boot (M17255) - One of each is shipped with the welder to connect the Magnum LA-9 torch. If you do not care to interchange these parts between torches (one of each is required to connect Magnum LA-9 or LA-17/LA-17V TIG torches with one-piece cable to the V200-T) you may order additional sets. The quick con- nect plug provides connection for both gas and weld- ing current.
TIG Torch Parts Kits - Parts kits are available for the LA-9 and LA-17/LA-17V TIG torches. These kits include back cap, collets, collet bodies, nozzles and tungstens.
Order KP507 for LA-9 torches
Order KP508 for LA-17/LA-17V torches
See publication E12.150 for parts kits breakdown. Cut Length Consumables - TIG welding filler metals are available for welding stainless steel, mild steel, aluminum and copper alloys. See publication C9.10.
