OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Twist-Mate Cable Connectors
1 – standard for Ground Clamp
1 – Gas Pass through for Tig Torch
Strap Packet
Instruction Manual
Field Installed
K857 - Remote Output Control - For Stick welding. When the V205-T’s Output Control is in the "REMOTE" position, this portable current control pro- vides the same range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
K870 - Foot Amptroltm for TIG welding. When the V205-T’s Output Control is in the “REMOTE” position, the foot Amptrol energizes the output and controls the output remotely. The Foot Amptrol connects directly to the 6 pin Amphenol.
K963-3 - Hand Amptroltm for TIG welding. When the V205-T’s Output Control is in the “Remote” position, the hand Amptrol energizes the output and controls the output remotely. The Hand Amptrol connects directly to the 6 pin Amphenol.
K814 - Arc Start Switch - Energizes the output for TIG welding if remote output control of the amperage is not desired. It allows on/off TIG welding at the cur- rent set by the Current Control on the control panel. When using the Arc Start Switch set the Output Control to the “LOCAL” position.
Magnum® PTA-9 and PTA-17 TIG Torches - The following standard Magnum® TIG torches with one- piece cable may be used with the Invertec V205-T.
• K1781-1 | PTA-9 | 12.5 ft | medium back cap |
• K1781-3 | PTA-9 | 25 ft | medium back cap |
• K1782-1 | PTA-17 | 12.5 ft | long back cap |
• K1782-3 | PTA-17 | 25 ft | long back cap |
NOTE: Each torch requires a Twist-Mate adapter, (one is included with the machine). Collets, collet bod- ies, and nozzles are not included and must be ordered separately.
TIG TORCH KITS
K2266-1 – TIG-Mate 17 Air Cooled TIG Torch Starter Pack. One complete easy-to-order kit pack- aged in its own portable carrying case. Includes: PTA- 17 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, Twist-mate™ adapter, work clamp and cable.
K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch Starter Pack. One complete easy-to-order kit pack- aged in its own portable carrying case. Includes: PTW-20 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, Twist-Mate™ adapter, work clamp and cable, and 10 ft. water hose.
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches to welding cable to provide quick disconnect from machine.
Twist-Mate Torch Adapter K1622-1 - One is shipped with the welder torch. If you do not care to interchange this part between torches (one is required to connect Magnum PTA-9 or PTA-17 TIG torches with one-piece cable to the V205-T) you may order an additional adapters. The quick connect plug provides connection for both gas and welding current.
K1622-4 – Twist-Mate adapter for Water-Cooled TIG torches. Adapter for PTW-18 and -20 Torches.
TIG Torch Parts Kits - Parts kits are available for the PTA-9 and PTA-17 TIG torches. These kits include back cap, collets, collet bodies, nozzles and tung- stens.
Order KP507 for PTA-9 torches Order KP508 for PTA-17 torches
See publication E12.150 for parts kits breakdown. Cut Length Consumables - TIG welding filler metals are available for welding stainless steel, mild steel, aluminum and copper alloys. See publication C9.10.
