Makita 4320 instruction manual T pin into Hole BPin for circular guide

Page 10

To attach the circular guide, use the pin, inserting it in the center hole (arrow) and secure it with the threaded knob. Then slide the base of the tool forwards. The circular guide attaches to the base of the tool in the same manner as the guide rule (rip fence).

Metal cutting

Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear.

The underside of the workpiece can be greased instead of using a coolant.

F i t pin into

the hole

bPin for circular guide

10

Image 10
Contents Jig Saw Safety Instructions Minimum Gage for Cord Sets Additional Safety Rules Installing or removing saw blade Hex wrench storage Switch action Front flush cuts Circular guide T pin into Hole BPin for circular guide Maintenance Accessor IES I11 8 JIG SAW LLM Makita Corporation