NCT Group NCT 100T, NCT 990T, NCT 2000T Timer and Counter Screen, Actions of Timer Counter Screen

3.6SETTING Screens

3.6.4 TIMER AND COUNTER Screen

In the general displaying area the different timers and counters can be seen. The highlighting bar can be moved to the timer or counter to be modified by means of arrow keys. Apart from the operating time the values are free to overwrite.

Actions of TIMER AND

COUNTER Screen

No action can be activated to this screen, a blank action menu is displayed by pressing action

menu key , however the

values of timers and counters can be overwritten only in this state.

3.6.5 TOOL POT TABLE Screen

In the general displaying area the tool pot table can be seen. The values of the table are preserved upon power-off.

In case not a local coded tool handle, but a random access magazine handle is to be used, a tool pot table is needed, in which the pot number of the magazine and number of the tool found in it can be selected.

Note

Local coded tool handle means, that reference to the tool is made at address T by the pot number of the magazine, in

which the desired tool can be found.

If tool reference is not local coded, a table is needed, which shows, which tool number can be found in which pot of the magazine.

Random access magazine handle means, that the position of tools in the magazine is not fixed. The returning tool (taken from the spindle) is not taken back into the position it was taken out, but into the nearest vacant position in magazine, in the simplest case in place of the selected (new) tool.

48