NCT Group NCT 100T, NCT 990T, NCT 2000T manual Tool Length Offset Measure Screen

3.4 OFFSETS Screens

For detailed description of work offset measure see the chapter 7.2.1 “Work Offset Mea- sure” on the page 76.

3.4.4 TOOL LENGTH OFFSET MEASURE Screen

In the upper part of general displaying area the position dis- play can be seen. The following information can be seen in the lower part of general displaying area going downwards. In line Nnn the length offset values of the indicated offset group can be seen for each axis. In the next line stands the number of the selected coordinate system, and below its offset registers. A highlighting bar can be moved along the axis addresses of leng- th offset register by means of

keys and

.

Actions of TOOL LENGTH OFFSET MEASURE Screen

The following actions and action menus can be activated to the TOOL LENGTH OFFSET

MEASURE screen by pressing action menu key :

Work	Ofs No		Auto		Single
coordnt1	search	2	meas	3	block 4	5	6	7	8	9	0

Work Coordinate System Action Menu (Work cld): When pressing the key the eligible co- ordinate systems appear in the menu bar: G54, G55, ... G59. After pressing the appropriate softkey the system returns to first level of action menu.

Offset Number Search: When pressing the key the letter N appears in spite of the axis address. At this point the number of the offset register can be entered. After entering the offset index the desired length offset register can be seen.

Automatic Measure: The function can only be used provided the machine is mounted with a tool length sensor.

Single Block: By pressing the key a single block can be entered in the bottom, data input line
by the use of the alphanumeric keyboard. After closing block edit (key	or	)

caption SBEX appears in the 2nd field of status bar. The block is executed with START

.

39