NCT Group NCT 2000T, NCT 100T, NCT 990T manual Actions of Edit Screen

3.3PROGRAM Screens

Last Action: When pressing the key the highlighting bar goes to the last block of the program.

Check Action: When pressing the key control brings the highlighting bar to the last block of the program, meanwhile it reads the entire program and examines its check sum. This way it checks if the program in memory is damaged (the program can be damaged for example due to storage or operation in too low temperature).

Block Search Action Menu: When pressing the key the following actions occur: First, Last, Exec, Go, Interrupted and Cancel. For description of the search actions see the chapter 13.6 “Automatic Operation Start after Block Search” on the page 117.

3.3.3 EDIT Screen

In the general displaying area the list of an editable program can be seen. The number and name of a program can always be read in the first line of the area.

It is possible to write or modify the program by pressing action

menu key . Modification

of protected programs is not possible. If EDIT mode is active and no program execution is interrupted (INTD), the selected main program is displayed on Directory screen, while if execu- tion is interrupted it is the

program, in which the line under execution can be found. In case the control is not in EDIT mode, or the second window is opened, the program selected on Directory general displaying area is displayed. If execution is not in INTD state modification of running program is not permitted.

Actions of EDIT Screen

For description of EDIT screen see the chapter 4.4 “Actions of EDIT Screen” on the page 62.

32