3.6 SETTING Screens
The below table contains the codes of the appropriate functions:
Function | Code | Function | Code |
|
|
|
|
General Security Gate | Generated |
|
|
|
|
|
|
work offsets | 15962 | open new program | 95148 |
|
|
|
|
relative position | 15962 | delete program | 95148 |
|
|
|
|
tool offsets | 15962 | edit program | 95148 |
|
|
|
|
tool pot table | 15962 | load program | 95148 |
|
|
|
|
tool life table | 15962 | save program | 95148 |
|
|
|
|
timers and counters | 7895123 | protect program | 7895123 |
|
|
|
|
PLC table | 15962 | DNC channel | Generated |
|
|
|
|
#100 macro variables | 95148 | user’s parameters | 7895123 |
|
|
|
|
#500 macro variables | 95148 | parameters | Generated |
|
|
|
|
run in auto menu | 456852 | PLC program | Generated |
|
|
|
|
run in MDI menu | 357159 | service operations | Generated |
Symbol = (cursor) can be moved to the desired data security service within a column by means
of buttons 
and 
. If columns are to be switched use buttons 
, 
.
If action menu button
is pressed the following actions are offered:
Open | Close |
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
0
Open action: If a locked function is to be opened and security key is at disposal move symbol
=(cursor) to the function. Turn the data security key to enable position on the machine than press Open button.
If no data security key is on the machine move symbol = to the function to be enabled than press Open button.
In this case, provided the function to be opened has fix code, message Code: _ _ _ _ _ _ _ _
appears in the bottom line. After entering the appropriate fix code taken from the above
table the data input can be closed with the help of button 
and the function is
enabled.
If the function has generated code, the following message is displayed in the bottom line:
nnnnnnnn code: _ _ _ _ _ _ _ _
where nnn is an
53
