NCT Group NCT 100T, NCT 990T, NCT 2000T manual 141

14.3 Listing of Global Messages

Error	Message	Description	Canceling and Re-
Code			pairing Method
3518	DIRECTORY FULL	At most 254 programs can be stored, for	The message is can-
		the file manager built in control enables	celed by RESET
		the registration of 254 programs in the di-	key.
		rectory. This message is displayed, if more	If a new program is
		programs are to be registered during pro-	to be opened one of
		gram execution by the use of command	the unnecessary old
		POPEN.	ones have to be de-
		This does not necessarily mean, that the	leted.
		memory is full.
3519	MEMORY FULL	This message is displayed by the NC, if	The message is can-
		the storage built in control is full during	celed by RESET
		program execution as the effect of	key.
		command BPRNT or DPRNT.	One of the unneces-
			sary old ones have to
			be deleted.
3520	FILE NOT EXISTS	If data is to be sent by means of command	The message is can-
		DPRNT or BPRNT and no channel is	celed by RESET
		open with command POPEN.	key.
3524	FILE NOT OPEN	If an NC action refers to a file not open.	The message is can-
			celed by RESET
			key.
			It is not the user’s
			fault, the operator
			cannot repair it.
3528	INVALID ERROR CODE	If invalid error code has been generated	The message is can-
		while managing a file.	celed by RESET
			key.
			It is not the user’s
			fault, the operator
			cannot repair it.
3530	SYSTEM ERROR	Internal communication error of the NC	The message is can-
		supervisor program.	celed by RESET
			key.
			It is not the user’s
			fault, the operator
			cannot repair it.
3545	MACRO TABLE BAD	If checksum of the memory area	The message is can-
		containing macro variables #500...#599,	celed by RESET
		preserved upon power-off is false.	key.
			The table of macro
			variables must be
			reorganized.

141