NCT Group NCT 100T USER’S Parameters Screen User’s Params, Actions of USER’S Parameters Screen

3.6SETTING Screens

program can also be named there. As the effect of keys

and

values are

saved in the appropriate macro variable. It is registered in the directory not under program number O, but under address T. Restoring values of the table is discussed in the chapter 3.3.1 on the page 30 “DIRECTORY Screen” Run action menu Table action.

3.6.7 USER’S PARAMETERS Screen (User’s Params)

In the general displaying area a restricted part - that can also be set by the user - of the parame- ters can be seen. The highlight- ing bar can be moved along the groups seen in general displaying area by means of arrow keys up and down. The selected group can be opened with the help of arrow key right, while with arrow key left the previous level can be displayed. If the highlighting bar stands on a pa- rameter, a new value can be given to the parameter in the bottom line of general displaying

area.

Actions of USER’S PARAMETERS Screen

No action menu can be activated to this screen, a blank action menu is displayed by pressing

action menu key , however the values of parameters can be changed only in this state. Editing of parameters is only permitted in EDIT mode.

51