14.3 Listing of Global Messages
Error | Message | Description | Canceling and Re- | |
Code | pairing Method | |||
|
| |||
|
|
|
| |
1105 | REFERENCE POINT t6 | This message is displayed, if during refer- | The message is can- | |
|
| ence point return in case of | celed by RESET | |
1115 |
| |||
| measuring system the distance between | key. | ||
1125 |
| two zero pulses is not in accordance with |
| |
| the values of parameter ZERODIS. |
| ||
|
|
| ||
|
|
| ||
1135 |
| Value of t is the name of the axis: X, Y, |
| |
|
| Z, U, V, W, A, B, C. |
| |
1145 |
|
| ||
| In the error code (1105, 1115, 1125, ...) |
| ||
|
| the digit on local value 10 (0, 1, 2, ...) +1 |
| |
1155 |
|
| ||
| is the physical axis number. |
| ||
|
|
| ||
1165 |
|
|
| |
|
|
|
| |
1175 |
|
|
| |
|
|
|
| |
1300 | FORBIDDEN AREA t+ | This message is displayed, if an externally | The error can be can- | |
|
| forbidden area has been specified by | celed only if the axes | |
1301 |
| |||
| means of command G22, and one of the | are moved away from | ||
1302 |
| axes runs on the limit of this area in direc- | the zone limit by | |
| tion +, or is in the forbidden area at the | means of manual | ||
|
| |||
|
| |||
1303 |
| moment of specification. | intervention. If in the | |
|
| Value of t is the name of the axis: X, Y, | moment of selection | |
1304 |
| |||
| Z, U, V, W, A, B, C. | one of the axes is in | ||
|
| In the error code (1300, 1301, 1302, ...) | the forbidden area, | |
1305 |
| |||
| the digit on local value 1 (0, 1, 2, ...) +1 is | first the specification | ||
|
| |||
1306 |
| the physical axis number. | must be canceled by | |
|
| means of command | ||
|
|
| ||
|
|
| ||
1307 |
|
| G23. | |
|
|
|
| |
1320 | FORBIDDEN AREA t– | This message is displayed, if an externally | The error can be can- | |
|
| forbidden area has been specified by | celed only if the axes | |
1321 |
| |||
| means of command G22, and one of the | are moved away from | ||
1322 |
| axes runs on the limit of this area in direc- | zone limit by means | |
| tion | of manual interven- | ||
|
| |||
|
| |||
1323 |
| moment of specification. | tion. If in the mo- | |
|
| Value of t is the name of the axis: X, Y, | ment of selection one | |
1324 |
| |||
| Z, U, V, W, A, B, C. | of the axes is in the | ||
|
| In the error code (1320, 1321, 1322, ...) | forbidden area, first | |
1325 |
| |||
| the digit on local value 1 (0, 1, 2, ...) +1 is | the specification | ||
|
| |||
1326 |
| the physical axis number. | must be canceled by | |
|
| means of command | ||
|
|
| ||
|
|
| ||
1327 |
|
| G23. | |
|
|
|
|
