NCT Group NCT 2000T, NCT 100T, NCT 990T manual Actions of PLC Table Screen

3.6SETTING Screens

actions in the menu bar, the meaning of which is the usual. With Exec in effect the selected line is cleared.

Save Action: When pressing the key the program number can be entered into the bottom data

input line. In case the input is terminated by any of the keys or

, the

program can also be named there. As the effect of keys

and

values are

saved in the appropriate macro variable. It is registered in the directory not under program number O, but under address T. Restoring values of the table is discussed in the chapter 3.3.1 on the page 30 “DIRECTORY Screen” Run action menu Table action.

3.6.6 PLC TABLE Screen

In the general displaying area the PLC table can be seen. Its length is specified in parameter 0062 PLC_TAB. The table can be optionally used by the machine tool builder.

The contents of the table are preserved upon power-off. The highlighting bar can be moved along the items of table

by means of arrow keys

and

.

The items of the table can be overwritten.

For information on usage of the table turn to the machine tool builder.

Actions of PLC TABLE Screen

The following actions can be activated by pressing action menu key :

Clear		Save
all	1	2	3	4	5	6	7	8	9

0

Clear All Action Menu: When pressing the key the question CLEAR ALL? can be seen in the bottom left part of general displaying area, together with Exec and Cancel actions n the menu bar, the meaning of which is the usual. With Exec in effect the entire table is cleared..

Save Action: When pressing the key the program number can be entered into the bottom data

input line. In case the input is terminated by any of the keys or

the

50