NCT Group NCT 100T, NCT 990T manual Check Screens, Program Text Screen, Listing of Running Program

3.2CHECK Screens

3.2 CHECK Screens

This screen serves for displaying running programs and their states.

3.2.1 PROGRAM TEXT Screen, Listing of Running Program

In the lower part of general dis- playing area the list of the run- ning program can be seen. One block on the list is highlighted; This is the block under execu- tion. In the middle part of gen- eral displaying areas of feed and revolution can be seen (provided the number of displayed axes is not more than six). The position display is in the upper part of general displaying area. In the first column the current tool po- sition in agreement with the se- lected POSITION screen (see the chapter 3.1), in the middle

column the distance to go position, while in the right one the end position can be seen.

3.2.2 FUNCTION Screen, Subprogram and Macro Levels

In the right-side subprogram field of general displaying area the active subprogram(s) can be seen. Directly after the number of the subprogram stands the repetition number. The fields on the bottom of general displaying area show information on the revolution state of spindle (M3, M4, M5, M19), of the gear range (M11, M12, M113,

M14,...), of the current tool

(Tnnnn), of auxiliary functions (A, B and C), as well as of further (in PLC program defined) M codes.

The first column shows the position in agreement with the selected POSITION screen (see the chapter 3.2), while the second one shows the distance to go position.

24