NCT Group NCT 100T, NCT 990T, NCT 2000T manual 129

14.3 Listing of Global Messages

Error	Message	Description	Canceling and Re-
Code			pairing Method
2000	PLC ERROR 001	At most 152 different messages can be	The message is can-
		sent by PLC. The message texts are	celed on the basis of
2001	PLC ERROR 002
		optional. In case no text is added by the	the PLC program.
		programmer of PLC, message PLC
2002	PLC ERROR 003		For information on
		ERROR ijk is displayed.
...			clearing the mes-
			sages turn to the ma-
		For the list of messages and the descrip-
...			chine tool builder.
		tion of messages turn to the machine tool
2150	PLC ERROR 151	builder.
2151	PLC ERROR 152
2500	PLC MESSAGE 1	At most 8 different indexed messages can	The message is clear-
		be sent by PLC. The messages texts are	ed on the basis of
2501	PLC MESSAGE 2
		optional. In case no text is added by the	the PLC program.
2502	PLC MESSAGE 3	programmer of PLC, text PLC MESSAGE	For information on
		ijk is displayed.
2503	PLC MESSAGE 4	The message can be indexed with maxi-	clearing the mes-
		mum 4 digits following the messages.	sages turn to the ma-
2504	PLC MESSAGE 5
		For the list of messages and the descrip-	chine tool builder.
2505	PLC MESSAGE 6
		tion of messages turn to the machine tool
2506	PLC MESSAGE 7	builder.
2507	PLC MESSAGE 8
3000	MIRROR IMAGE IN G51,	If mirror image (G50.1, G51.1) is	The message is can-
	G68	switched on or off in the switched-on-state	celed by RESET
		of scaling (G51), or rotation (G68).	key.
3001	VALUE EXCESS X,Y,...F	If coordinate or feed data exceeds value	The message is can-
		range permitted.	celed by RESET
			key.
3002	PLANE SELECTION IN	If plane selection (G17, G18, G19) is	The message is can-
	G68	executed in the switched-on-state of	celed by RESET
		coordinate rotation.	key.
3003	COORDINATE ADDRESS	If an axis outside the selected plane is	The message is can-
	G68	specified in command G68 when giving	celed by RESET
		the center of rotation.	key.
3004	MISSING REFERENCE	If reference point return has not been per-	The message is can-
	POINT	formed before absolute movement is pro-	celed by RESET
		grammed on an axis.	key.
3005	ILLEGAL G CODE	If no function or custom macro call has	The message is can-
		been defined for a G code referred to or	celed by RESET
		two or more conflicting G codes in a block	key.
		are specified.

129