NCT Group NCT 100T, NCT 990T, NCT 2000T manual Check, Program, Offsets, Graphics

2 General Operating Knowledge

further items after Service screen menu, those would be shown by pressing the screen menu

key , until the first part of screen menu is returned.

The number seen in the bottom right corner of menu field indicates the softkey number of the appropriate menu field and not the line number of the menu within the screen menu (for more see parameter SFNUMB ).

By pressing the softkey of the active screen menu, its menu appears. On the basis of the previous example the following menu appears by pressing the Position softkey:

Absolute

1

Relative

2

Machine

3

End

4

Overall

5

The Position menu consists of five items, therefore starting with the sixth menu field the forthcoming ones stay blank (for those have no meanings at all).

Suppose, that the second - and last - level of the screen menu is in effect. Here by pressing the softkeys the caption of the appropriate menu field becomes highlighted and the selected screen appears immediately. On the second level there is no Page softkey, because there the desired screen can instantly be selected. If there is not enough room for the screens forming a screen menu in the menu bar, the subsequent parts can be brought in by pressing the screen menu key

. If the last menu item of the screen menu is already in the menu bar, then by pressing

screen menu key the first level of the screen menu is returned.

The following menu items (screens) can be selected from the screen menus:

Position

Absolute			Relative	Machine	End		Overall		Cartesia
	1		2	3		4		5	n	6	7	8	9	0
Check
Text			Function	Last	Active		Oprtr`s		Message
	1		2	3		4	panel	5		6	7	8	9	0
Program
Director		View		Edit	Block		FEW
y	1		2	3	input	4		5		6	7	8	9	0
Offsets
Work			Tool	W. offs.	T. leng.		Rel. pos
offsets	1		offsets 2	measur 3	measur	4	offsets	5		6	7	8	9	0
Graphics
Graphic			Draw
param	1		2	3		4		5		6	7	8	9	0

18