NCT Group NCT 2000T, NCT 100T, NCT 990T manual Actions of OPERATOR’S Panel Screen, Key

3.2CHECK Screens

Action I can be used for input of incremental operator. Action Block Delete clears the whole block in buffer.

3.2.4 OPERATOR’S PANEL Screen

The general display area of OP- ERATOR’S PANEL shows a view on the state of the most essential machine control items. The controllability of different item groups from softkeys is permitted by the PLC program. The illustration shows the gen- eral displaying area of the con- trol panel.

In the topmost button group the state of operation mode switches can be seen. Below it the state of axis selecting switch is shown.

This is followed by the incre- ment selecting switch, than in

the third line the percent switches are displayed.

The button group in the middle reflects the state of condition switches and the one below that of PLC switches.

Actions of OPERATOR’S PANEL Screen

The following actions can be activated on Operator’s Panel screen by pressing action menu

key :

Modes	Axes		Incr		%		Conditio		Mach		Clear
1		2		3		4	ns	5		6	rel.pnt.7	8	9	0

The first six keys are menu keys, i.e. by pressing the appropriate softkey the action keys belonging to the given menu become visible. On the menu field of action keys, if the appropri- ate softkey is pressed and the control accepts it the key stays depressed. The seventh CLEAR RELPNT is an action key, i.e. its pressing results in an immediate effect.

The controllability of each action menu from softkeys is permitted or prohibited by the PLC program. If an action cannot be controlled from softkeys, it can be accessed from an external control device. Instruction regarding this can be found in the enclosed manual of the machine.

26