NCT Group NCT 2000T, NCT 100T, NCT 990T manual Actions of Work Offset Measure Screen

3.4OFFSETS Screens

3.4.3 WORK OFFSET MEASURE Screen

In the upper part of general displaying area the current tool position can be seen. The first column always shows the machine position, the middle column the position in the selected coordinate system, while the last one the distance to go position. The following infor- mation can be seen in the lower part of general displaying area going downwards. In line Nnn the length offset values of the indicated offset group can be seen for each axis. In the next line stands the number of the se-

lected coordinate system, and below its offset registers. Along the offset registers highlighting

bar can be moved by means of keys and the offset register to be modified.

. This highlighting bar enables to select

Actions of WORK OFFSET MEASURE Screen

The following actions and action menus can be activated to the WORK OFFSET MEASURE

screen by pressing action menu key :

Work	Ofs No		/2		Single
coordnt1	search	2		3	block 4	5	6	7	8	9

0

Work Coordinate Action Menu: When pressing the key the eligible coordinate systems appear in the menu bar: G54, G55, ... G59 and Work shift. After pressing the appropriate softkey the system returns to first level of action menu.

Offset No. Search: When pressing the key letter N appears in spite of the axis address. At this point the number of offset the register can be entered. After entering the offset number the desired length offset register can be seen in general displaying area.

/2 Action: It halves value written on the current address letter. During execution half of the value in the coordinate address can be seen in input field.

Single Block: By pressing the key a single block can be entered in the bottom, data input line
by the use of the alphanumeric keyboard. After closing block edit (key	or	)

caption SBEX appears in the 2nd field of status bar. The block is executed with START

.

38