![Maintenance (Continued)](/images/new-backgrounds/94040/9404029x1.webp)
Maintenance (Continued)
• Save all instructions
How to Change the Oil
NOTE: Refer to Figure 11 when following the steps below:
1.Stop the engine and allow it to cool.
2.Disconnect spark plug wire from the spark plug.
3.Insert a flat pan under the Trimmer, underneath the oil drain plug.
4.Remove oil dipstick. (See Figure 5)
5.Remove the oil drain plug and washer.
6.Allow all oil to drain into the pan.
IMPORTANT: Used oil is a hazardous waste. Place oil in a sealed container and take to your local recycling center. Do NOT discard with household waste.
7.Replace the oil drain plug and washer.
8.To
“How to Check Oil and Fill to Proper Level”
How to Clean the Air Filter
A dirty air filter will restrict air intake. Periodic maintenance of the air filter will help improve engine performance and reduce emissions.
WARNING
Never clean air filter with gasoline or an easy ignited solvent because it may cause explosion.
1.Remove the air filter cover, and carefully remove the filter element. (See Figure 12)
2.Clean all parts.
3.Blow off dirt from filter element with compressed air. (See Figure 13)
4.Reinstall the filter element and air filter cover.
Oil Drain Plug
NOTE: View is bottom of the unit
Figure 11
Filter Element | Air Filter Cover |
Figure 12
Figure 13
Questions? Call Toll Free at | 14 | Copyright © 2009 MAT Engine Technologies, LLC |