Operation
• Save all instructions
A | Before Starting the Engine |
WARNING
Before starting engine, read operator’s manual. Become fa- miliar with location and function of all controls. Know how to stop the engine quickly.
Before attempting to start the engine, review the following steps:
1.Unit has been assembled according to all assembly instructions.
2.Unit has been inspected for any damaged or missing components.
3.No parts are remaining in the carton.
4.Engine oil is at proper level.
5.Fresh, clean,
6.Spark plug wire is connected to spark plug.
7.Trimmer has been moved to desired location.
8.Trimmer is on level surface.
WARNING
Keep all bystanders, especially CHILDREN, away during op- eration.
Important: This unit’s engine exhaust system is equipped with a
B How to Start the Engine
DANGER
Never run engine indoors or in a poorly ventilated area. En- gine exhaust contains Carbon Monoxide, an ODERLESS and DEADLY gas.
WARNING
Debris thrown from Trimmer can cause severe eye damage. Always wear ANSI compliant safety glasses or eye shields when operating trimmer. If you wear eyeglasses, put an OSHA certified Wide Vision Safety Mask over your eyeglasses.
WARNING
Before starting Trimmer, clean debris from holes in the recoil starter cover.
1.Review ALL steps in the “BEFORE STARTING THE
ENGINE” section.
2.Push the throttle lever in the forward position. (See Figure 6)
3.Push the Primer Bulb 3 times, waiting 2 seconds between each push. (See Figure 7)
NOTE: Not required when
Questions? Call Toll Free at | 9 |
Stop
Slow
Start/Fast
Throttle Control | Figure 6 |
Lever |
Primer
Button
Figure 7
Copyright © 2009 MAT Engine Technologies, LLC