Powermate P-WFT-16022 Maintenance Continued, Save all instructions, How to Check the Spark Plug

Maintenance (Continued)

• Save all instructions

How to Check the Spark Plug

Spark Plug Model: Torch F6RTC

CAUTION

Only use the recommended spark plug or a spark plug with the same temperature range. Using an improper spark plug, an incorrect spark plug gap, or a dirty/fouled spark plug can reduce engine performance and cause damage.

1.Stop engine and allow it to cool.

2.Remove spark plug wire from spark plug.

3.Remove the spark plug with a 13/16 in. (21 mm) deep well socket.

4.Visually inspect the spark plug for cracks or damage. If cracked, replace spark plug.

5.Clean carbon deposits. If excessive carbon build up, re place spark plug.

6.Check that the gap of the spark plug is 0.028-0.031 in. (0.7-0.8 mm). (Figure 18)

7.Re-insert the spark plug and tighten to 18-22 foot-pounds (25-30 Nm).

8.Reattach spark plug wire to spark plug.

0.028-0.031 in. 0.7~0.8 mm

Figure 18

Questions? Call Toll Free at 1-800-737-2112 16 Copyright © 2009 MAT Engine Technologies, LLC