Powermate P-WFT-16022 specifications Assembly, Save all instructions, How to Assemble the Handle

Assembly

• Save all instructions

Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled. References to the right or left side of the trimmer are from the viewpoint of the operator’s position behind the trimmer.

If you need assistance or find any parts missing, CALL TOLL FREE: 1-800-737-2112.

Handle

WARNING

Do not operate trimmer if it is damaged or not completely and correctly assembled.

		Rope Guide
WARNING			Recoil Start
Before doing any assembly or maintenance to the unit, re-			Handle
move the wire from the spark plug. The following compo-
nents will be found in the carton. Quantities shown in ( ).
(1)	Trimmer
(1)	Trimmer Operator’s Manual		Handle Pivot	Handle
(1)	Container of SAE 30 Engine Oil
				Adjustment
(1)	T-Handle Allen Wrench
				Knob
(4)	0.155 in. [4 mm] Trimmer Lines (2 sets)

How to Assemble the Handle

NOTE: Refer to Figure 2 when following the steps below

1.	Hold the handle with one hand and loosen both handle
	adjustment knobs until the ratchet teeth are disengaged.
2.	Do not remove the handle adjustment knobs.
	Press sides of handle apart and rotate the handle to
3.	the desired position behind the trimmer.
	Stand in the operator’s position behind the trimmer to
4.	make sure handle is adjusted to a comfortable position
	Firmly hand-tighten the handle adjustment knobs.
5.	To attach the recoil start handle to the rope guide, twist
	the rope through the rope guide mounted on the right	Figure 2
	side of the handle.

Questions? Call Toll Free at 1-800-737-2112 6 Copyright © 2009 MAT Engine Technologies, LLC