Powermate P-WFT-16022 Engine Preparation Continued, How to Fill Engine with Fuel, B Fuel

Engine Preparation (Continued)

• Save all instructions

B Fuel

WARNING

• Gasoline is extremely flammable and vapors can	Fuel Tank Cap
explode if ignited. Handle with care.

Use fresh, clean, regular-unleaded gasoline with a minimum of 88 Octane.

Do NOT use leaded gasoline, gasohol, methanol, or diesel fuel. Do NOT mix oil with gasoline. Do NOT allow gasoline to become contaminated with dust, water, or debris.

CAUTION

Using incorrect fuel type or contaminated fuel will cause serious engine damage.

NOTE: Fuel tank capacity is approximately 0.95 qt (0.9L)

How to Fill Engine with Fuel

WARNING

Oil Fill Cap/Dipstick

Figure 5

•Turn engine off and let engine cool for several minutes before removing the fuel cap or adding fuel.

•Never fill fuel tank indoors.

•Do not smoke while adding fuel.

1.Clean surface around fuel tank cap to prevent contaminations. Refer to Figure 5 for location of fuel cap.

2.Loosen fuel cap slowly to remove.

3.Pour fuel into the tank. Use care to avoid spillage.

WARNING

Do NOT OVERFILL fuel. Allow space for the fuel to expand due to heat from engine and/or sun.

4.Before replacing the fuel cap, inspect and clean the fuel cap seal.

5.Replace the fuel cap and securely hand-tighten. On model S-WFT-16022 only, you will feel and hear a click when the cap is secure.

6.Clean up any spilled fuel.

Questions? Call Toll Free at 1-800-737-2112 8 Copyright © 2009 MAT Engine Technologies, LLC