NCT Group NCT 990T, NCT 100T, NCT 2000T manual Actions of Relative Position Offsets Screen

3.4OFFSETS Screens

For detailed description of work offset measure see the chapter 7.2.2 “Tool Length Offset Measure inside the Machine” on the page 79.

3.4.5 RELATIVE POSITION OFFSETS Screen

In the general displaying area below the current tool position are the values of relative position offsets. An inverse bar can be moved on axis addresses by

means of keys and

This bar enables to select the offset register to be modified. Modification of registers does not have the slightest effect on program execution, this display is only for the operator.

.

Actions of RELATIVE POSITION OFFSETS Screen

The following action menu can be activated to the RELATIVE POSITION OFFSETS screen

by means of action menu key :

Clear all 1

2

3

4

5

6

7

8

9

0

Clear All Action Menu: When pressing the key the question CLEAR ALL OFFSETS? appear in the bottom left part of general displaying area, together with Exec and Cancel actions in menu bar, the meaning of which is the usual.

40