NCT Group NCT 990T, NCT 100T, NCT 2000T manual Screen of Common Macro Variables #100-#199

3.6SETTING Screens

3.6.2 Screen of COMMON MACRO VARIABLES #100–#199

In the general displaying area common macro variables #100–#199 and their values can be seen. Variables #120–#199 are vacated upon power-off and when resetting automatic mode (RESET) Variables #100–#119 are also vacated in case of value 1 of parameter CLCV, otherwise their values are preserved.

A highlighting bar can be moved along the macro variables by means of arrow keys up and down. This highlighting bar shows the variables to be edited. A new value can be given to the

variables in the bottom line. By terminating data input the new value is written in the variable. Values can also be given to macro variables indirectly; By entering the code of another macro variable (e.g.: #540) it registers the value of that variable. By entering #0 the macro variable is vacated.

Actions of COMMON MACRO VARIABLES #100–#199 Screen

The following actions and action menus can be activated to the screen of COMMON MACRO

VARIABLES #100–#199 by pressing action menu key :

Vacant		Zero		Exp
all	1	all	2	3	4	5	6	7	8	9

0

Vacant All Action Menu: When pressing the key the question CLEAR VACANT ALL? can be seen in the bottom left part of general displaying area, together with Exec and Cancel actions n the menu bar, the meaning of which is the usual. With Exec in effect all macro variables are vacated (#0).

Zero All Action Menu: When pressing the key the question ZERO ALL? can be seen in the bottom left part of general displaying area, together with Exec and Cancel actions in the menu bar, the meaning of which is the usual. With Exec in effect all macro variables are zeroed (0).

Exp Action: When pressing the key the exponent of the variable can be entered.

46