NCT Group NCT 990T, NCT 100T, NCT 2000T manual Position Screens

3.1POSITION Screens

3.1 POSITION Screens

There can be five types of POSITION screens. The first four screens displays the selected position with big-size characters, meanwhile on the fifth screen all position displays as well as in case of six or fewer axes the feed and revolution values are also displayed with normal characters. In case of an oriented spindle when the loop is closed (state M19) the screen shows the angle position of the spindle instead of the revolution. If the spindle can be programmed as axis C, the line starts with C in place of S. In the line of feed display the current coordinate system number can also be read.

in the G53 coordinate system in respect of length offsets.

ABSOLUTE POSITION Scre- en (Absolt): In the selected coordinate system in respect of the appropriate offsets and compensations.

RELATIVE POSITION Scre- en (Relatv): After refer- ence point has been re- turned it corresponds to absolute position. It can be overwritten or zeroed in an optional state.

MACHINE POSITION Scre- en (Mach): Position measured

END POSITION Screen: End position of the block in the current coordinate system in respect of length offsets.

OVERALL POSITION Screen

(Overll): Beside the previous four displays the distance to go also gets to be displayed. It shows how much is left of the current movement. By this display (in case of six or fewer axes) the programmed and current feed and revolution can also be seen.

22