NCT Group NCT 100T, NCT 990T Operation Modes Actions Modes, Axes Actions, Increment Actions Incr

3.2CHECK Screens

Operation Modes Actions (Modes)

The following modes can be selected:

Edit	Auto		Mdi		Jog		Incr		Handle		Ref
1		2		3		4		5		6	7	8	9

Axes Actions

0

In the menu bar all axes of the machine tool are listed. Here the axis, with which an action must be done, can be selected. This action is necessary for example if an axis is to be moved by means of a manual handle. The axis to be moved must be selected by the use of the appropriate softkey In this case a highlighted frame surrounds the letter indicating the selected one in the Axis line of general displaying area.

X		Y		Z		B
	1		2		3	4	5	6	7	8	9

Increment Actions (Incr)

0

In the menu bar the eligible increment sizes are listed. If one is selected, it is surrounded by a highlighted frame. The selected increment has function in the Incremental feed (INCR) and Manual handle feed (HNDL) modes. The values seen in the menu bar are in increments.

1	10	100	1000
1	2	3	4	5	6	7	8	9

% Actions

The rapid traverse, spindle and feedrate switches can be modified by pressing softkeys.

R-	R+		S-		S+		F-		F+
1		2		3		4		5	6	7	8	9

The current position of switches can be seen in the middle of general displaying area at addresses G, S and F.

Conditions Actions

The following states can be switched on or off:

0

0

Single

Cond.

Cond.

Block

Block

Dry run

Machin

Test

block

1

block

2

stop

3

return

4

restart 5

6

e lock 7

8

9

0

Machine Actions (Mach)

Maximum eight optionally used softkeys. Their captions are determined by the PLC program, about their operation and usage instructions can be read in the enclosed manual of the machine. Provided the :197 module of PLC program does not contain the caption of keys, the PLC1, PLC2 ... PLC8 is set automatically.

27