Diagram 2 | Hardware Kit. |
A
C
E
F
DG
B
Carefully unpack the pieces of the treadmill and lay them on the floor near the location where you plan to use the treadmill.
Hardware Kit
After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and make sure that you have the following items:
(A) twenty — 1” long buttonhead screws
(B) fourteen — flat washers
(C) four — 3/4” long flat head screws
(D) four — flat washers
(E) 1/4” hex key — belt adjustment
(F) 3/16” hex key — mount uprights, display and handrails to base frame
(G) 5/32” hex key — install handrails to display and hood to base
If any items are missing, contact Customer Support at
Note: After assembling the treadmill, be sure to store the hex keys in a secure place. The tools are used for specific maintenance procedures that are described in this manual.
Acquiring the Appropriate Tools
Obtain the following tools before assembling the treadmill.
Wire cutter
Bubble level
Medium weight string [about 1 foot (30 cm)]
Strong adhesive tape
SAE Standard socket set with a ratchet or 8” Crescent wrench
page 10
