Viewing the Odometer, Hours of Use, Software Version and Error Log
Start at the Precor banner and press the Stop button. Then, within ½ second, initiate the following key sequence.
Speed ▲, Speed ▼
Note: You can use the number keys (6, 5) instead of Speed ▲, Speed ▼ if you prefer.
The field name Odometer appears briefly and then the odometer value (the cumula- tive distance users have travelled) appears in miles or kilometers.
Press Enter and the number of hours (Hour Meter) that the unit has been in use appears. The treadmill notes the passing of each minute, but the numeric value that appears is truncated to the nearest full hour.
Press Enter again and the unit’s three digit Software Version (upper and lower) appears on the display.
Press Enter once again and the Error Log appears. Press any ▼ or ▲ key to view the error messages. To return to the Precor banner, press Enter, Stop, or Reset.
Note: To clear (delete) the error log, press Quick Start for at least 4 seconds while viewing the list. Prompts appear on the display and let you know when the error messages have been deleted (“cleared” from memory).
Important: You cannot retrieve the error log once you have deleted it.
page 34
