NCT Group NCT 2000T, NCT 100T, NCT 990T manual 137

14.3 Listing of Global Messages

Error	Message		Description	Canceling and Re-
Code				pairing Method
3086	DEFINITION ERROR G51		If scaling axis by axis is programmed	The message is can-
			(G51 X Y Z I J K) and X and U, or Y and	celed by RESET
			V, or Z and W are in one block.	key.
3087	ILLEGAL PLANE SELECT		If in G76 multiple thread cutting cycle, on	The message is can-
			lathe control, not G18 plane is selected.	celed by RESET
				key.
3088	FORBIDDEN	SPINDLE	If no spindle encoder is on the machine	The message is can-
	MOVING		and an instruction demanding spindle en-	celed by RESET
			coder has been programmed (e.g. thread	key.
			cutting, orientation).
3089	BUFFER OVERRUN G41,		If buffer has been overrun in offset mode	The message is can-
	G42		(G41, G42).	celed by RESET
				key.
3090	# DEFINITION	PROHIB-	Defining prohibited macro variable (#....).	The message is can-
	ITED		This may be due to its type (e.g., #1000,	celed by RESET
			... #1015), or it may be prohibited at	key.
			parameters 9101 WRPROT1, 9102
			WRPROT2.
3091	ERRONEOUS OPERATION		If, in case of macro variables (#...), the	The message is can-
	WITH #		operands and operations conflict. E.g.: if	celed by RESET
			logical addition (AND) has been com-	key.
			manded between macro variables that can-
			not be represented in 32 bits in fix point
			mode.
3092	DIVISION BY 0 #		If, in case of evaluating a macro	The message is can-
			expression, division is to be done by 0.	celed by RESET
				key.
3093	BUFFER OVERRUN #		Buffer has been overrun with macro vari-	The message is can-
			ables.	celed by RESET
				key.
3094
3095
3096
3097
3098	ERRONEOUS ARGUMENT		If the function value exceeds the range.	The message is can-
			If e.g., SQRT[-4] or ASIN[2]),	celed by RESET
			if, in case of instruction BCD, the	key.
			transformed number is of more than 8
			digits,
			if, in case of instruction BIN, not a BCD
			number is defined on the decades.
3099

137