Lincoln Electric 215 manual With the Spool GUN Adapter KIT and Spool GUN Installed

Page 20
POWER MIG 215

C-2

 

 

ACCESSORIES

C-2

MAKING A WELD

WITH THE SPOOL GUN

 

ADAPTER KIT AND SPOOL GUN

 

 

INSTALLED

CAUTION

 

 

 

 

 

 

In either toggle switch position, closing either gun

 

trigger will cause the electrode of both guns to be

 

electrically “HOT”. Be sure unused gun is posi-

 

tioned so electrode or tip will not contact metal

 

case or other metal common to work.

 

 

------------------------------------------------------------------------

 

1. Setting spool gun selector switch to the “Normal”

 

position and pulling the trigger for the built-in feed-

 

er gun.

 

 

 

• Disables spool gun operation and spool gun

 

gas solenoid valve.

 

 

• Closing feeder gun trigger starts feeder gun

 

welding and makes both electrodes electrically

 

“HOT”.

 

 

 

2. Setting spool gun selector switch to the Spool Gun

 

Position and pulling SPOOL GUN Trigger.

 

• Disables built-in feeder gun operation and

 

machine gas solenoid valve.

 

 

• Enables spool gun operation and spool gun gas

 

solenoid valve.

 

 

 

• Closing spool gun trigger starts spool gun weld-

 

ing and makes both electrodes electrically

 

“HOT”.

 

 

 

3. Operation with POWER MIG 215:

 

 

• Turn the POWER MIG-215 input power ON.

 

• Adjusting the voltage tap control will increase or

 

decrease your welding voltage.

 

 

• Adjusting the wire speed control on the spool

 

gun will increase or decrease the spool gun

 

wire feed speed. NOTE: Adjusting the wire feed

 

speed control on the Power Mig Panel has no

 

affect on the spool gunʼs wire feed speed.

 

4. Refer to the procedure decal on the Power Mig for

 

initial aluminum settings. Make a test weld to deter-

 

mine the final settings.

 

 

5. To return to normal POWER MIG 215 welding,

 

release the spool gun trigger set spool gun selector

 

switch to normal and reset feeder gun voltage pro-

 

cedure setting if necessary.

 

 

Image 20
Contents Power MIG Safety For EngineElectric Magnetic Fields Chemicals known to the State of California to causeFumes and Gases AUGJan For ElectricallyIii Précautions DE Sûreté Précautions DE Sûreté PourLES Machines À Souder À Transformateur ET ÀThank You As much pride as we have in bringing this product to youMaster Table of Contents for ALL Sections Master Table of Contents for ALL Sections Installation Technical Specifications Power MIGUncrating the Power MIG Input POWER, GroundingConnection Diagrams Safety Precautions Figure A.2 Receptacle Diagram Figure A.1 Dual Voltage Machine Input ConnectionsGUN and Cable Installation Shielding GAS1OPERATIONB-1 Wear eye, ear and body protec- tionWire Drive Roll Wire Size Conversion PartsOperation Product Description LimitationsDrive and Idle Roll Sets Spools or CoilsTo Start the Welder To Mount 10 to 44 Lb .5-20 kg Spools 12/300Feeding Wire Electrode Making a Weld Avoiding Wire Feeding ProblemsVariations ProtectionAccessories With the Spool GUN Adapter KIT and Spool GUN Installed Maintenance Cause poor wire feeding Liner Removal and ReplaceMent This screw should only be gently tightenedGUN Handle Disassembly Troubleshooting HOW to USE Troubleshooting GuideContact your local Lincoln Not activated Gun assembly is faulty. Repair orAuthorized Field Service Facility Feed but drive rolls are turning Position of groovesWire feed stops while welding Click when the gun trigger isWiring Diagrams Wiring Diagrams Dimension Print Power MIG Power MIG Ground Aspiración para gases
Related manuals
Manual 35 pages 49.45 Kb