Lincoln Electric 215 manual Installation, Technical Specifications Power MIG

A-1				INSTALLATION						A-1
TECHNICAL SPECIFICATIONS – POWER MIG 215
Standard Voltage/Phase/Frequency			Input Current @ 170 Amp Rated Output					Input Current @ 215 Amp Rated Output
208/230/1/50/60 Hz				(With 115V receptacle loaded to 15A)				(With 115V receptacle loaded to 15A)
				39/35 Amps					45/41 Amps
				RATED OUTPUT
Duty Cycle					Amps			Volts at Rated Amperes
30%				215 Amps						22 Volts
40%				190 Amps						23 Volts
60%				170 Amps						24 Volts
				OUTPUT
Welding Current Range				Maximum Open Circuit Voltage				Welding Voltage Range
30 – 250Amps				35 Volts					13.5-24 Volts
	RECOMMENDED	INPUT WIRE AND FUSE						SIZES
				Input Ampere			75°C Copper Wire			75°C Copper Wire
Input Voltage/	Fuse or Breaker						in Conduit			in Conduit
				Rating On			AWG (IEC) Sizes			AWG (IEC) Sizes
Frequency (Hz)	Size (Super Lag)			Nameplate			(For lengths			(For lengths
							up to 100 ft.)			exceeding 100 ft.)
208/50/60	60			45A			10 (6 mm2)			8 (10 mm2)
230/50/60	60			41A			10 (6 mm2)			8 (10 mm2)
	NOTE:
				Use #10 AWG Grounding Wire
Wire Speed			WIRE SPEED RANGE
					50 – 700 IPM (1.27 – 17.8 m/minute)
Height	Width					Depth			Weight
31.79 in	18.88 in					38.78 in			210 Ibs
808 mm	480 mm					985 mm			95 kg
	TEMPERATURE RANGES
OPERATING TEMPERATURE RANGE							STORAGE TEMPERATURE RANGE
-4°F to 104°F(-20°C to +40°C)							-40°F to 185°F(-40°C to +40°C)

POWER MIG 215