| Position |
| Cutting action |
|
| Applications |
|
|
| |
| 0 |
| straightline cutting action | For cutting mild steel, stainless steel and plastics. |
| |||||
I |
| I |
| For clean cuts in wood and plywood. |
|
| I | |||
| ~~~ | ~~~~ | ~ | ~ | ~ | ~ | ~~~ | |||
I | Smallorbit cutting action | 1 For cutting mild steel, aluminum and hard wood. | ||||||||
| I11 |
| Large orbit cutting action | For fast cutting in wood and plywood. |
|
| ||||
To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and move the lock lever backward. To stop the tool from the locked position, pull the trigger fully, then release it.
Speed adjusting dial
ILocklever | |
wc S w i t c h | trigger |
For 4305
CAUTION :
Before plugging in the tool, always check to see that the switch actuates properly.
To start the tool, slide the switch lever for- ward. Slide the switch lever backward to stop.
8