Specifications

Model		5007NH

Blade diameter		185 mm (7-1/4”)

	at 90°	60 mm (2-3/8”)

Max. Cutting depth	at 45°	46 mm (1-3/4”)

	at 50°	40 mm (1-19/32”)

No load speed (RPM)		5,800/min.

Overall length		295 mm (11-5/8”)

Net weight		4.6 kg (10.1 lbs)

•Manufacturer reserves the right to change specifications without notice.

•Specifications may differ from country to country.

GENERAL SAFETY RULES

USA002-2

(For All Tools)

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distrac- tions can cause you to lose control.

Electrical Safety

4.Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec-