FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
001339
1
2 
1.Depth guide
2.Lever
001359
12
3
1.Lever
2.Bevel scale plate
3.Positive stopper
Adjusting depth of cut
CAUTION:
•After adjusting the depth of cut, always tighten the lever securely.
Loosen the lever on the depth guide and move the base up or down. At the desired depth of cut, secure the base by tightening the lever.
For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below workpiece. Using proper cut depth helps to reduce potential for dangerous KICKBACKS which can cause personal injury.
Bevel cutting
CAUTION:
•When changing the positive stopper’s position from 50° to 45°, adjust the bevel angle to less than 40° by loosening the lever. And change the positive stopper’s position.
Loosen the lever on the bevel scale plate on the front of the base. Set for the desired angle (0° - 45° or 0° - 50°) by tilting accordingly, then tighten the lever securely. Adjust the posi- tion of positive stopper to 45, the bevel angle can be adjusted 0 - 45°, adjust the same to 50, it can be adjusted 0 - 50°.
001376
B 
A
1
Sighting
For straight cuts, align the A position on the front of the base with your cutting line. For 45° bevel cuts, align the B position with it.
1. Base
9