Makita 5007MG-R dimensions Repair, Safety Cover

P 2/10

Repair

CAUTION: Unplug the machine and remove the saw blade from the machine for safety before repair/ maintenance in accordance with the instruction manual!

[1] NECESSARY REPAIRING TOOLS

Code No.	Description	Use for
1R003	Retaining ring S pliers ST-2N	Removing/installing Retaining ring S-42 from/on Spindle
1R004	Retaining ring S pliers ST-2	Pulling off Sleeve 6 from the hinge portion of Angular guide
1R008	Tips for retaining ring pliers (90 degrees)	(modular use with 1R004)
1R041	Vise plate	Fixing Bearing box section in vise
1R045	Gear extractor (large)	Removing Spindle from Bearing box
1R208	90-degree Set square	Squaring Saw blade to Base plate
1R229	1/4" Hex shank bit for M5	Removing Hex socket head bolt M5x40 from the hinge portion of
		Angular guide
1R236	Round bar for arbor 7-100	Removing Spindle from Helical gear 47
1R269	Bearing extractor	Removing Ball bearing 608LLB from Spindle
1R316	Adjustable bearing retainer wrench	Removing/installing Bearing retainer from/on Bearing box

[2] LUBRICATION

Apply Makita grease N. No.1 to the following portions designated with the black triangle to protect parts and product from unusual abrasion.

Item No.	Description	Portion to lubricate
32	Blade case complete	Gear room for Helical gear 47 (Apply approximately 6g.)
		32

[3]DISASSEMBLY/ASSEMBLY

[3]-1. Safety Cover

DISASSEMBLING

1)Remove Pan head screw M6x20 and Rubber sleeve 6. (Fig. 1)

2)Remove Retaining ring S-42 with 1R003. (Fig. 2)

3)Remove Torsion spring 4 and Safety cover from Blade case.

Then remove Spacer from Bearing box. (Fig. 3)

Fig. 2

Retaining ring S-42

1R003

Fig. 1

Retaining ring S-42

Rubber sleeve 6

Pan head screw M6x20

Safety Cover

Fig. 3

Blade case Bearing box

Tension spring 4
Safety cover	Spacer