P 10/10
5008MGA (with electric brake)
Circuit diagram |
| |
Fig. |
|
|
| Color index of lead wires' sheath |
|
Black | Yellow |
|
White | Orange | Protective tube |
Red |
| (Varnish tetron tube) |
| Switch | LED Job light |
|
| |
cord |
| Field |
|
| |
Power supply | black/brown |
|
Terminal block |
| |
white/blue |
| |
| Motor housing | |
| Handle | |
Wiring diagram
Fig. D-4
Route Field lead wire (yellow) | [B] |
between the rib and the wall of Handle. |
|
rib
[B] 
Switch
[A] 
Terminal block
When fixing lead wires with this lead wire holder, fix LED lead wires (red) first, then Field lead wires (black, yellow, orange).
[A]If Power supply cord is equipped with a string loop, put the loop around the ribs as illustrated below before putting Terminal block in place.
Put Protective tube in this portion.
Protective tube
Fix two lead wires (red) to LED Job light with this lead wire holder.
LED Job light
Pull out Field lead wires (orange) from this portion.
[B]Bend the terminals of Switch as illustrated below so that they do not touch the rib and the wall of Handle.
Power supply cord
string loop
rib
Switch
terminal