P 6/10
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-4. Motor Housing Section (cont.)
ASSEMBLING
Do the reverse of the disassembling steps.
Note 1: Be sure to assemble Motor housing section to Blade case while pressing Shaft lock in the direction of
the black arrow to position the stopper of Shaft lock inside Blade case. (Fig. 16) Armature shaft cannot be locked if the stopper of Shaft lock is positioned outside Blade case as illustrated in Fig. 17.
Note 2: When securing Lever 56 (the one used for cut depth setting) with Bow stop ring
Fig. 16 | Fig. 17 |
Motor housing section, | Front grip | |
viewed from top | ||
|
Shaft lock
Compression spring 9 
Blade case, | stopper of Shaft lock |
viewed from top |
|
Shaft lock
stopper of Shaft lock
[3] -5. Bearing Box Section and Gear Section
DISASSEMBLING |
| Fig. 18 |
|
1) Remove Safety cover. See Figs. 1, 2, 3 on page 2. |
|
| |
2) Remove Bearing box section together with Gear section from |
|
| |
Blade case by unscrewing two M5x16 Pan head screws. (Fig. 18) |
|
| |
3) Separate Bearing box section from Gear section using 1R045. | Blade case |
| |
(Fig. 19) |
|
|
|
4) Turn over Gear section, and remove Ball bearing 608LLB from |
|
| |
Gear section using 1R269. |
|
|
|
Then put 1R236 on the top end of Spindle and press it using |
|
| |
arbor press. |
|
|
|
Spindle can now be separated from Helical gear 47. (Fig. 20) |
|
| |
|
| Pan head screw |
|
|
| M5x16 (2pcs) | Bearing box section |
Fig. 19 | Fig. 20 |
|
|
| 1R269 |
| 1R236 |
|
|
| |
1R045 |
|
|
|
| Ball bearing |
| |
| 608LLB |
| |
Bearing box section |
| Helical gear 47 | |
|
|
| |
| Gear section |
| |
Gear section |
|
| Spindle |
|
|
| |