Wilton 7015 manual Fault Probable Cause Suggested remedy, Bad cuts rough, Blade is twisting

Page 22

	Fault		Probable Cause		Suggested remedy

		1.	Blade speed too high for feed	1.	Reduce blade speed and feed
	Bad cuts (rough)		pressure.		pressure.
	Bad cuts (rough)
		2.	Blade is too coarse.	2.	Replace with finer blade.

	Blade is twisting	1.	Blade is binding in the cut.	1.	Decrease feed pressure.
	Blade is twisting	2.	Blade tension too high	2.	Decrease tension on Blade
		2.	Blade tension too high	2.	Decrease tension on Blade

		1.	Blade guides worn	1.	Replace blade guides.
	Unusual wear on	2.	Blade guide bearings not adjusted.	2.	Adjust blade guide bearings.
	side/back of blade	3.	Blade guide bearing bracket is	3.	Tighten blade guide bearing
			loose.		bracket.

22

Image 22

Contents X 13-in Horizontal Cut-Off Bandsaw Part No. M-7015Warranty and Service WarrantyTable of Contents Page Page Specifications IntroductionMachine Base Machine FeaturesSaw Head Electrical Connection Unpacking and AssemblyMachine Setup Work StopControls and Indicators Blade SpeedsOperations Blade Break-in ProceduresBlade Selection Hydraulic Feed ControlSetting the Vise for Square Cuts Work SetupSetting The Vise For Angle Cuts Evaluating Cutting EfficiencyStarting the Saw Saw will automatically shut off at the end of the cutSetting the Work Stop Coolant Flow and Nozzle PositionBlade Tracking Adjustment AdjustmentsKeep fingers clear of the blade and wheel to avoid injury Blade Guide Adjustment Left Blade GuideBlade Guide Bearing Adjustment Drive Belt Tension AdjustmentDisconnect the cut-off saw from its electrical power source Verifying Adjustment AccuracySwitch Adjustment Counterbalance Spring TensionMaintenance Changing BladesChanging the Drive Belt Replacing the Drive MotorLubrication CleaningCoolant Fault Excessive blade breakage TroubleshootingBad cuts crooked Probable Cause Suggested remedy Blade is twisting Fault Probable Cause Suggested remedyBad cuts rough Unusual wear onSaw Stand and Bed PartsIndex No. Part No Description Size Qty TS-1490031 Saw Stand and Bed Parts Breakdown 7015-200 7015-314-1 Index No Description Size Qty Saw Head Parts Breakdown Electric Assembly Parts and Breakdown SDE MA-15Wiring Diagram Ordering Replacement Parts WMH Tool Group