Wagner SprayTech 9140S, 9210 Cleanup, Purging the Paint Hose, Cleaning the Suction SET

Page 10

IMPORTANT CLEANING

NOTES!

READ THESE NOTES AND

WARNINGS BEFORE YOU

START TO CLEAN YOUR

SPRAYER!

•When using latex paints, clean your sprayer and components using warm, soapy water.

When using oil-based paints, use mineral spirits.

•Do not use mineral spirits on latex paint, or the mixture will turn into a jelly-like substance which is difficult to remove.

•No matter which cleaning solution you use, make sure to dispose of it properly when finished cleaning your sprayer.

•Thorough cleaning and lubrication of the sprayer is the most important step you can take to ensure proper operation after storage.

CALL 1-800-880-0993

IF YOU HAVE ANY QUESTIONS REGARDING THE CLEANUP OF YOUR SPRAYER

WARNING

Special cleanup instructions for use with flammable solvents:

•ALWAYS FLUSH SPRAY GUN AT LEAST ONE HOSE LENGTH AWAY FROM SPRAY PUMP.

•If collecting flushed solvents in one gallon metal container, place it into an empty five gallon container, then flush.

•Area must be free from vapors.

•Follow all cleanup instructions.

CLEANUP

PURGING THE PAINT HOSE

These steps will allow you to recover excess paint left over in the paint hose.

1.Lock the gun and remove spray tip assembly.

2.Submerge suction set into a bucket with appropriate cleaning solution.

3.Hold the spray gun against the side of the paint can and hold the trigger.

4.While holding the trigger, turn the pump ON (l), and turn the PRIME/SPRAY knob to SPRAY.

PRIME

l

SPRAY

Let the pump run until all paint is purged from the hose and cleaning solution is coming out of the gun.

5.Release the trigger.

6.Hold the spray gun against the side of a separate container and hold the trigger.

7.Trigger the gun until the fluid coming out of the gun is clear.

8.Turn the PRIME/SPRAY knob to PRIME and trigger gun once more to relieve pressure.

9.Move on to Cleaning the Suction

Set.

CLEANING THE SUCTION SET

1.

Lock the gun and turn

 

 

the pump OFF (O).

o

2.

Remove the suction

 

hose and return tube and clean it using the appropriate cleaning solution.

You should also wipe the threads of the inlet valve, and remove and clean the suction set screen.

3.When suction set is clean, thread the suction tube back onto the inlet valve, and replace the return tube onto the return tube fitting. Replace clip.

Return tube

fitting

Inlet valve

Clip

Return tube Suction set

4.Submerge the suction set into a bucket of NEW cleaning solution.

5.Turn the PRIME/SPRAY knob to PRIME, turn the pump to ON (l), and trigger the gun into a waste container to relieve the pressure.

PRIME

SPRAY

l

6.Let the pump circulate the cleaning solution through the suction set for 2- 3 minutes.

7.Turn the pump OFF (O).

8.Move on to Cleaning the Spray Gun, next page.

English

Customer Service: 800-880-0993 10

© 2003 Wagner Spray Tech - All rights reserved.

 

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Specifications Table of ContentsHigh Performance Airless Sprayer Safety Information Read ALL Safety Important Electrical Information Grounding InstructionsComponents Components and DescriptionControls and Functions SETUP--ASSEMBLING the Sprayer Plugging in the Sprayer Pressure Relief ProcedureBefore YOU Begin Before YOU Prime the SprayerPurging & Priming Your hose is now purged and primed. You are ready to paintPractice SprayingSpraying Technique Cleaning the Suction SET Screen Spraying TroubleshootingCleaning the Spray GUN Filter Unclogging the Spray TIPMove on to Cleaning the Suction Set CleanupCleaning the Suction SET Move on to Cleaning the Spray Gun, nextCleaning the Spray GUN Filter and TIP Assembly Shutdown StoragePreparing the Sprayer for LONG- Term Storage StartupDaily Maintenance MaintenanceAccessories Extended MaintenanceDisassembly of the Fluid Section Fluid Section Seal Replacement InstructionsAssembly of the Fluid Section Troubleshooting ProblemParts List Liste DE PIÈ CES Lista DE Piezas Suction SET Dispositif ’ASPIRATION Juego DE Succió NArticle N de piè ce Description Quantity Articulo0347706 02962910296343 0296262Articulo Pieza# Descripció n Cantidad Article N de piè ce Description QuantitéMinneapolis, Minnesota Wagner Spray Tech CorporationFernbrook Lane Telephone

9140, 9140S, 9210 specifications

Wagner SprayTech is a renowned name in the field of paint sprayers, offering innovative solutions for both professionals and DIY enthusiasts. Among its impressive lineup, the Wagner SprayTech 9210, 9140S, and 9140 models stand out due to their advanced features and technologies, making paint application more efficient and manageable.

The Wagner SprayTech 9210 is designed for versatility and efficiency. It boasts a high-performance motor, allowing for consistent spray patterns and even coverage. This model features the Flexio technology, which utilizes two independent paint flow controls for superior control over paint flow rate and air pressure. This ensures minimal overspray and allows for precise application on a variety of surfaces, from walls to furniture.

The 9140S model builds on the performance of the 9210, emphasizing ease of use. One of the key features is the adjustable material flow dial, enabling users to tailor the paint output according to their specific needs. It also incorporates a unique iSpray nozzle, which provides a wide spray pattern and is perfect for large surfaces. Additionally, the 9140S is engineered for cleaning convenience, with a quick-release system that allows for fast disassembly and thorough cleaning, promoting longevity and durability.

The 9140 model is a compact and lightweight option ideal for smaller projects or tight spaces. It offers a simplified design without sacrificing performance. It comes equipped with a powerful turbine that delivers a fine finish, whether users are applying stains, sealers, or paints. The adjustable air cap allows for horizontal or vertical patterns, adding to its versatility.

All three models are designed with user-friendly features, including ergonomic handles and easy-to-fill tanks. They are suitable for a range of materials, making them ideal for various painting projects. Whether you're a professional painter or a weekend DIY warrior, Wagner SprayTech’s 9210, 9140S, and 9140 provide the technology and design to achieve a professional-quality finish with minimal effort. With their combination of innovative technologies, adjustable features, and ease of use, these sprayers are an excellent choice for anyone looking to enhance their painting experience.
Top Page Image Contents