Wagner SprayTech 770 owner manual Clean Spray Gun, Tips if Experiencing Spray Issues, Pull

Page 15

Clean the

Start

1 What you’ll need

•Wrench

•Warm, soapy water for latex material

•Mineral spirits for oil based materials

•Replacement spray gun filter

(if necessary)

2 Perform Pressure Relief Procedure

Page 7

3.Pull trigger guard to separate from filter housing

4.Unscrew filter housing using a wrench

5.Remove filter from housing

English

6. Clean with appropriate	7. Inspect
cleaning solution for material	filter for	8. Replace cleaned filter, tapered end first,
being used; warm, soapy water	damage and	into gun housing. Note: It is important to place
for latex material and mineral	replace if rips	tapered end first to ensure proper sprayer
spirits for oil based material	are found	operation

Tips if Experiencing Spray Issues • Clean the Spray Gun Filter

9.Reassemble spray gun

Image 15

Contents Contents Before You Start Important Safety InformationBefore You Start Questions? What’s in the Box?Tighten Thread Assemble Your Wagner Paint CrewProper Use Functions Using the Wagner Paint CrewUsing the Wagner Paint Crew Important Safety Warning Pressure Relief ProcedurePush Load MaterialSpecial Note What you’ll needHold the Spray Gun Level TipSpray Technique Spray PatternOverlap Your Strokes Inlet Filter Solutions if Experiencing Spray IssuesKeep material flowing smoothly while spraying Spray TipClear Spray Tip Replace CleanFilter HandleClean Spray Gun Tips if Experiencing Spray IssuesPull Cleanup and Storage Storage Mineral orInstructions are for latex material only Startup from Short Term Storage Flush Material From Sprayer Minutes Inlet FilterOIL ComponentsLong Term StorageOIL Troubleshooting Fix Spraying ProblemsProblem E The spray gun leaks Remove Inlet ValveQuantity Parts List Liste de pièces Lista de piezasWarranty Garantie Garantía Limited Warranty for Your Paint Crew