Wagner SprayTech 770 owner manual Inlet Filter, Minutes

				2
Clean the Hopper
		MINERAL	or
		SPIRITS
Start	1	What you’ll need
		• Warm, soapy water
		• Mineral spirits if using oil-
		based material
		• Rags		2. Rinse hopper with appropriate cleaning
		Do not allow any fluid to drip		solution
		onto the motor housing.

Cleanup and Storage

3

INLET

FILTER

3.Remove inlet filter and clean with appropriate cleaning solution. Replace inlet filter in hopper

5

6

7	N
U	R
T

9 11

2-3 MINUTES

4.Partially fill hopper with

NEW cleaning solution

5.Remove material return tube from hopper

6.Hold tube over waste container

8
ON	l

7.Turn knob to PRIME

8.Turn power ON

10
OFF	O

9.Hold material return tube over a waste container. Run for

2to 3 minutes

10.Turn power OFF

11.Properly dispose of cleaning solution in hopper Note: If mineral spirits were used to clean hopper repeat clean hopper instructions using warm, soapy water

English

Cleanup and Storage • Clean the Hopper 19